Exhibition

We are active amongst regional and local manufacturing exhibitions. Feel free to send us a message online or visit us in person at our booths. Our most recent conventions include the following.

东莞展 DMP 2019

The three exhibits were

2TME123 dual-mould general-purpose injection moulding machine making two types of PET preforms in two standard moulds,

iPM intelligent power meter measures the energy consumption of 2TME123 as it produced,

TME110 Acc high-injection speed injection moulding machine making iPhone 11 covers in a 2-cavity mould with robot arm takeout.

广州展 Chinaplas 2019

Tat Ming displayed the dual-mould 5Gal2-1000 to make crystal-clear 380 g preforms in two 2-cavity moulds. The intelligent power meter iPM was connected to measure energy consumption.

东莞展 DMP 2018

Tat Ming displayed the dual-mould 5Gal2-1000 to make crystal-clear 380 g preforms in two 2-cavity moulds. The intelligent power meter was connected to measure energy consumption.

The compact precision MA21-M injection moulding machine uses a Moog valve to make Smartphone lens mounts.

上海展 Chinaplas 2018

Tat Ming booth

At the Tat Ming booth, the dual-mould 5Gal2-1000 made crystal-clear 380 g preforms in two 2-cavity moulds. The intelligent power meter was connected to measure energy consumption.

HKPMA booth

At the HKPMA booth, two posters were displayed. One showed the dual-mould technology. The other showed the TME300 DR two component injection moulding machine.

东莞展 DMP 2017

The three exhibits in DMP 2017 were

5Gal2-1000 to make 380 g 5-gallon preforms in two 2-cavity moulds,

Precision mini injection moulding machine MA21-M to make lens holders for smartphones,

iPM intelligent power meter to measure energy consumption of 5Gal2-1000.

上海展 Chinaplas 2017

2017 marked the 60th anniversary of Tat Ming’s first injection moulding machine made in Hong Kong.

There were two booths in which Tat Ming participated. There was a seminar too.

Tat Ming booth

At the Tat Ming booth, 5Gal2-1000 making 380 g 5-gallon preforms in two 2-cavity mould was exhibited.

iPM intelligent power meter was exhibited.

HK booth

At the Hong Kong booth, the 2-component TMV110 injection moulding machine making dripping tubes was exhibited.

Seminar

In a seminar during the exhibition, how the dual-mould technology improves productivity was explained and compared with other technologies.

上海展 Chinaplas 2008

Tat Ming booth

Tat Ming displayed the dual-pump CAP48 DP machine dedicated to making bottle caps. Our partner Xijie provided the 48-cavity mould. Cycle time below 5 s was achieved.

Sino booth

Tat Ming displayed a dual-pump CAP32 DP installed with a T-mould program to make lunch box and lid with robot arm takeout in a fully automatic operation.

广州展 Asiamold 2008

Tat Ming displayed a dual-pump CAP32 DP installed with a T-mould program to make lunch box and lid with robot arm takeout in a fully automatic operation.

深圳展 SIMM 2008

Tat Ming displayed a dual-pump CAP48 DP to make two types of utensils. The T-mould is made from two standard moulds of forks and knives.

A young violinist played music for visitors.

东莞展 DMP 2007

2007 marked the 50th anniversary exhibiting Tat Ming’s first injection moulding machine in Hong Kong (in 1957). 

Tat Ming displayed a high-injection speed Acc200 to make round thin-wall disks in two cavities.

There was a CAP32 DP machine too.

The MA21 is a compact injection moulding machine to make small parts. 

A free talk on ‘Using stack mould and T-mould to raise productivity’ was given.

连系展 Linkage 2007

Tat Ming displayed a high-injection speed Acc200 to make round thin-wall disks in two cavities.

The Acc 50/30 is a compact accumulator-driven injection moulding machine to make small parts. It uses a Moog servo valve for injection.

A free talk on ‘Bubbles formation and elimination’ was given.

Work With Us

We partner with first-time and mature businesses in their manufacturing processes.